[1] |
International Organization for Standardization. In vitro diagnostic medical devices-requirements for establishing metrological traceability of values assigned to calibrators,trueness control materials and human samples[S]. ISO 17511,ISO, 2020.
|
[2] |
International Organization for Standardization. In vitro diagnostic medical devices-measurement of quantities in samples of biological origin-requirements for content and presentation of reference measurement procedures[S]. ISO 15193,ISO, 2009.
|
[3] |
International Organization for Standardization. In vitro diagnostic medical devices-measurement of quantities in samples of biological origin-requirements for certified reference materials and the content of supporting documentation[S]. ISO 15194,ISO, 2009.
|
[4] |
International Organization for Standardization. General requirements for the competence of testing and calibration laboratories[S]. ISO/IEC 17025,ISO, 2017.
|
[5] |
International Organization for Standardization. Laboratory medicine-requirements for the competence of calibration laboratories using reference measurement procedures[S]. ISO 15195,ISO, 2018.
|
[6] |
周伟燕, 刘庆香, 刘珍妮, 等. 计量溯源性和临床检验参考系统[J]. 临床检验杂志, 2020,38(10):721-728.
|
[7] |
Clinical and Laboratory Standards Institute. Characterization and qualification of commutable reference materials for laboratory medicine;approved guideline[S]. EP30-A,CLSI,ISO, 2010.
|
[8] |
Clinical and Laboratory Standards Institute. Evaluation of commutability of processed samples;approved guideline—third edition[S]. EPl4-A3,CLSI,ISO, 2014.
|
[9] |
MILLER W G, SCHIMMEL H, REJ R, et al. IFCC working group recommendations for assessing commutability part 1:general experimental design[J]. Clin Chem, 2018,64(3):447-454.
DOI
URL
PMID
|
[10] |
NILSSON G, BUDD J R, GREENBERG N, et al. IFCC working group recommendations for assessing commutability part 2:using the difference in bias between a reference material and clinical samples[J]. Clin Chem, 2018,64(3):455-464.
DOI
URL
PMID
|
[11] |
Clinical and Laboratory Standards Institute. Uncertainty of measurement-part 3:guide to the expression of uncertainty in measurement (GUM:1995)[S]. ISO/IEC Guide 98-3,ISO, 2008.
|
[12] |
ELLISON S L R, ROSSEIN M, WILLIAMS A, et al. EURACHEM/CITAC guide:quantifying uncertainty in analytical measurement[S]. EURACHEM/CITAC, 1995.
|
[13] |
International Organization for Standardization. Propagation of distributions using a Monte Carlo method[S]. ISO/IEC Guide 98-3/Supplement 1,ISO, 2008.
|
[14] |
International Organization for Standardization. In vitro diagnostic medical devices-requirements for international harmonization protocols establishing metrological traceability of values assigned to calibrators and human samples[S]. ISO 21151,ISO, 2020.
|
[15] |
International Organization for Standardization. Conformity assessment-general requirements for proficiency testing[S]. ISO/IEC 17043,ISO, 2010.
|